Repair and welding: In the early stage of aluminum forging, it is necessary to determine how many pulling points need to be welded to pull out the concave part, and then gently flatten it with a plastic hammer specially used for aluminum forging process.
After the welding point is completed, all welding points should be pulled up slowly at the same time. When welding aluminum car bodies, the welding joints should be free of debris, and the appropriate current should be adjusted, and short arc welding should be used as much as possible.
Dealing with deformation: Aluminum is very soft and cannot be hit with a hammer. If the deformation is serious, the deformed part can only be cut off, and then welded and smoothed with a special welder for aluminum forging.
Health protection measures in the aluminum products industry:
Keep your skin clean: After work, be sure to thoroughly wash your whole body, especially the exposed skin and hands, with mild shower gel and clean water.
Wear appropriate work clothes: Wear work clothes with long sleeves and long pants when working, and choose cotton or other materials with good breathability.
Use protective equipment: Wear protective equipment such as gloves and masks, and make sure that these protective equipment fit your size and remain intact during use.
Keep the workplace clean: Clean the workplace regularly to remove substances that may cause allergies.
Seek medical help: If the itching symptoms persist or worsen, it is recommended to see a doctor as soon as possible.
